sprinklers
sprinklers
Sprinklers are the most effective way to protect a property from fire, because of their quick reaction time. In homes and offices, the sprinklers are installed in ceilings or behind walls, and are placed in a network of water filled piping. Each sprinkler covers a certain area and protects against fire. It activates quickly when the temperature reaches the designated temperature, and then forcefully sprays water on the flames, and either completely extinguishes the fire or at the least controlling the spread of fire, till the fire department arrives. This reduces the risk of death or injury from any such events, as it helps in reducing the heat, flames and the smoke resulted due to the fire.
LANDING VALVES
OBLIQUE VALVE, FLANGED INLET
landing valves are suitable for installation on wet risers in a building for firefighting purposes with permanently charged water from a pressurised supply.
The landing valves are oblique type with flanged inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard.
The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar
FEATURES
• BSI Kitemark and LPCB certified.
• Body material made of copper alloy to EN 1982
• Hand wheel material made of grey cast iron to BS EN 1561.
• Blank cap material made of copper alloy to EN 1982.
• Possible to replace the gland seal when under pressure with the valve fully closed.
• Disc facing rubber is of replaceable type.
• Valves are provided with a strap and pad lock so that the
• hand wheel can be secured to counter unauthorized use.
• The hand wheel is BLACK painted and body to RED
OBLIQUE VALVE, MALE THREADED INLET
landing valves are suitable for installation on wet risers in a building for firefighting purposes with permanently charged with water from a pressurised supply.
The landing valves are oblique type with threaded inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard.
The landing valves are classified under low prossure and
are suitable for use at nominal inlet pressure up to 15 bar
FEATURES
• BSI Kitemark approved
• Body material made of copper alloy to EN 1982
• Hand wheel material made of grey cast iron to BS EN 1561.
• Blank cap material made of copper alloy to EN 1982.
• Possible to replace the gland seal when under pressure with the valve fully closed.
• Disc facing rubber is of replaceable type.
• Valves are provided with a strap and pad lock so that the
• hand wheel can be secured to counter unauthorized use.
• The hand wheel is BLACK painted and body to RED
PRESSURE REDUCING VALVE, FLANGED INLET
pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes permanently charged with water from a pressurized supply.
These landing valves are pressure reducing type designed
to provide a range of outlet pressure (4 bar -12 bar). The landing valves are classified under high pressure and are suitable for use at nominal inlet pressure upto 20 bar.
FEATURES
• BSI Kitemark approved.
• Body material made of copper alloy to EN 1982.
• Hand wheel material made of grey cast iron to BS EN 1561.
• Blank cap material made of copper alloy to EN 1982.
• Possible to replace the gland seal when under pressure with the valve fully closed
• Disc facing rubber are of replaceable type.
• Valves are provided with a strap and pad lock so that the
• hand wheel can be secured to counter unauthorized use.
• The hand is painted black and the body is painted red
4"x2 WAY BREECHING INLET
breeching inlets are suitable for installation on dry risers only in a building for fire fighting purposes fitted with inlet connection at fire brigade access level and outlet connection at specified points which is normally dry but capable of being charged with water by pumping from fire service appliances
The breeching inlets are manufactured to comply with
BS 5041 PART-3:1975 standard comprising of male
instantaneous connections complying with BS 336:2010,
drain valves complying with BS 5154, PN16 rated and non
return valves.
FEATURES
• BSI Kitemark and LPCB certified.
• Body material made of spheroidal graphite cast iron (Ductile Iron) to BS 1563:2011.
• Inlet connection and non-return valves material made of copper alloy to BS 12163:2011.
• Each inlet connections are fittad with non-return valve and are of spring loaded mushroom type.
• Each breeching inlet is painted RED internally and externally.
6"x4 WAY BREECHING INLET
breeching inlets are suitable for installation on dry risers only in a building for fire fighting purposes fitted with inlet connection at fire brigade access level and outlet connection at specifies points which is normally dry but capable of being charged with water by pumping from fire service appliances.
The breeching inlets are manufactured to comply with
BS 5041 PART-3:1975 standard comprising of male instantaneous connections complying with BS 336:2010, drain valves complying with BS 5154, PN16 rated and non-return valves.
The breeching inlets and its fittings are suitable for a normal working pressure of 10 bar.
FEATURES
• BSI Kitemark and LPCB certified.
• Body material made of spheroidal graphite cast iron (Ductile Iron) to BS 1563:2011.
• Inlet connection and non-return valves material made of copper alloy to BS 12163:2011.
• Each inlet connections are fittad with non-return valve and are of spring loaded mushroom type.
• Each breeching inlet is painted RED internally and externally.