The Carbon Dioxide (CO2) Fire Suppression System is an engineered system using either a fixed nozzle agent distribution network, hose reel(s), or a combination of both. carbon dioxide system will extinguish fire in Class A, B, and C hazards by depleting oxygen in the room which supports combustion. The system can actuate by detection and control equipment for automatic system operation along with providing local and remote manual operation as needed. Accessories are used to provide alarms, delay discharge, ventilation control, door closures, or other auxiliary shutdown or functions. Due to the method of extinguishment, personnel occupying areas protected by carbon dioxide systems must be evacuated prior to system discharge. For this reason, discharge time delays and alarms are mandatory for occupied hazards. Two or more hazard areas can be protected with a single group of agent storage containers (cylinders) by means of directional or selector valves. Basic Use: The Carbon Dioxide system is particularly useful for suppressing fires in hazards where an electrically non-conductive medium is essential or desirable; where clean-up of other agents presents a problem; or where the hazard obstructions require the use of a gaseous agent. The following are typical hazards protected by carbon dioxide systems: Printing Presses
• Vaults
• Open Pits
• Dip Tanks
• Spray Booths
• Ovens
• Engine Rooms
• Coating Machines
• Process Equipment
• Hoods And Ducts
• Flammable Gas Or Liquid Storage Areas
• Generators

FM200 (Heptafluoropropane, HFC-227ea) automatic fire extinguishing system is a gas fire, automatic control and fire detection is one of the modern intelligent automatic fire extinguishing system.
When the FM200 gas fire extinguishing system environment of submerged endeavors, it can be combined with physical and chemical reaction process rapidly and effectively eliminate heat, prevent the happening of the fire, the physical properties of FM200 performance in its molecule vaporizing stage can rapid cooling flame temperature; And the release of free radicals in the process of chemical reaction, will eventually stop burning a chain reaction
The fire extinguishing speed, high efficiency, strong initiative. FM200 clean gas automatic fire extinguishing system can completely extinguish fire in 10 seconds, usually clean gas fire extinguishing agent FM - 200 relative to the reserve design fire extinguishing concentration is low, only 9%, FM - 200 clean fire extinguishing agent is liquid is stored and can be quickly purification clean fire extinguishing gas, highly motivated to put out a fire.

- electrical
- magnetic media
- documents
- or high value of collection and equipment
- and the protected objects without damage, without leaving any residue after fire, do not interrupt the daily work of protected areas.

FM200 clean fire extinguishing gas is internationally recognized as harmless to the human body of fire extinguishing agent, non-toxic and will not cause respiratory problems.FM - 200 clean gas automatic fire extinguishing system to release pressure of small, non-toxic, very suitable for resident staff reserves.

FM200 clean fire extinguishing gas is not international environmental groups included in the stop the use of gas, will not damage the atmospheric ozone layer, the remaining period in atmosphere is only 31 ~ 42 years.

FM200 clean gas automatic fire extinguishing system for the current environmental protection laws and regulations, so without replacement and duplication of investment in the future.Can also be used in design of the combined distribution method design centralized storage systems, more economic efficient fire protection.FM - 200 clean gas automatic fire extinguishing system is small in size, number of cylinders is little, so can save the area between the gas cylinder or don't need a cylinder.